Print notice

| Significant incident report | No.82 V 1 | 27 July 2020

Worker Entangled in Conveyor Drum

What happened?

On Tuesday 19 May 2020, a worker was seriously injured at a quarry when his left arm became entangled in the rotating drum of a conveyor belt. Prior to the accident, the conveyor had been stopped to enable clearing of rock spillage from the tail drum area. The injured worker was attempting to clear rock from the nip point, where the return side of the belts meets the tail drum, when the conveyor was briefly energised (jogged) by another worker from the plant switchboard located some distance away. The conveyor belt was cut in order to free the injured worker.

Recommendations

Equipment

Conveyor

Authorised by Hermann Fasching -

Contact: Trevor Brown, Deputy Chief Inspector of Mines , +61 7 4447 9253

Issued by Queensland Department of Natural Resources, Mines and Energy

All information on this page (Worker Entangled in Conveyor Drum - https://www.rshq.qld.gov.au/safety-and-health-alerts/mines/worker-entangled-in-conveyor-drum) is correct as of time of printing (Nov 20, 2026 4:50 pm).