Print notice

Alert no. 434 | 14 September 2023 | Version 1

Rear dump truck rollover

What happened?

A haul truck rollover incident occurred at a surface coal mine. On Friday 8 September 2023 a Caterpillar 793C rear dump truck was travelling loaded approaching a slight right-hand bend.  The operator failed to negotiate the corner and the truck mounted the high-risk bund on the left side of the road.  The truck continued up the bund rolling onto the right-hand side of the truck coming to rest on the running surface of the haul road (refer Figure 1). The reason for failing to negotiate the bend is still under investigation.

How did it happen?

The high risk bunding was installed to protect a crib hut that was positioned adjacent to the haul road.

The final position of the truck was 68m from the crib hut.

The time of incident was 5:23am.

Watering of the haul road did not contribute to the incident.

The truck was not fitted with a driver safety system such as ADS or DSS.

The high risk bunding prevented the haul truck contacting the crib hut.

First responders were trained in emergency response.

The operator did not sustain any fractures however they do have a small laceration and minor bruising because of the incident.

Key learnings

Authorised by Jacques le Roux - chief-inspector-coal

Contact: Stuart Brown, Inspector of Mines , +61 7 3199 8001

Issued by Resources Safety & Health Queensland

Safety: This information is a guide only and is issued to promote safety through experience. It is not to be taken as a statement of law and must not be construed to waive or modify any legal obligation.
Placement: Place this announcement on noticeboards and ensure all relevant people in your organisation receive a copy.

All information on this page (Rear dump truck rollover - https://www.rshq.qld.gov.au/safety-and-health-alerts/mines/rear-dump-truck-rollover) is correct as of time of printing (Nov 5, 2026 11:38 pm).