Print notice

| Mines safety bulletin | No.112 V 1 | 26 October 2011

Mine road safety

Read about a recent mine road workshop; the resulting work on surface friction investigation, mine road design, construction and maintenance management.

The mining industry workshop with the theme 'Controlling uncontrolled movements of mine vehicles' (Rockhampton 31 May 2011) sprang from Mines Inspectorate concern about uncontrolled movement of vehicles and plant caused by mine road conditions.

The workshop focused on mine road design, construction, and maintenance practices.

This bulletin aims to alert mine operators and workers to the workshop presentations and its important outcomes:

Mine road friction supply measurement pilot study

Existing methods of assessing mine road friction supply (slipperiness) are normally subjective, relying on the experience and gut feel of those making such assessments.

The presentation Friction Supply—the Measured Approach (David Tulloch, RoadSafety Training Services) showed a simple, objective and cost-effective method to assess friction measurement. The method complements existing subjective judgment with scientific corroboration to give mine operators confidence in their safety decisions.

The technology and process are proven, having been developed and used by the Queensland Police and the Department of Transport and Main Roads for sealed roads. To Tulloch's knowledge, it has never been used on a mine site, nor as a tool for safe road design, construction, maintenance and assessment in the mining industry.

Supported by a positive industry response, DEEDI Mine Safety and Health commissioned RoadSafety Training Services to conduct a pilot study of surface friction evaluation methods and protocols for unsealed mine roads. A Vericom Accelerometer was used to measure friction supply. (See reference 1.)

The study aimed to develop a quantitative method of measuring friction supply of mine roads. The study results:

Mine haul road design, construction and maintenance practice

Dr Roger Thompson, Western Australia School of Mines, who presented GSFM—An integrated approach to mine haul road design, has also compiled and published the eBook Mining roads—mine haul road design, construction and maintenance management. (reference 2).

The Mines Inspectorate recommends mine operators consider the information in this eBook to help them control movement of vehicles to an acceptable level of risk.

Further reading and references

  1. Tulloch D & Stocker D 2011, Coal mine road network surface friction report 2011
  2. Thompson R 2011, Mining roads—mine haul road design, construction and maintenance management

Note: The information and links provided in this bulletin are given in good faith under section 128(b) of the Coal Mining Safety and Health Act 1999, and section 125(d) of the Mining and Quarrying Safety and Health Act 1999.

Authorised by Gavin Taylor -

Contact:

Issued by Queensland Department of Employment, Economic Development and Innovation

Placement: Place this announcement on noticeboards and ensure all relevant people in your organisation receive a copy.

All information on this page (Mine road safety - https://www.rshq.qld.gov.au/safety-and-health-alerts/mines/mine-road-safety) is correct as of time of printing (Nov 22, 2026 10:38 pm).