Alert
no. 121 |
10 August 2026 |
Version 1
Fireworks debris strikes spectator
What happened?
- A spectator at a recent fireworks display was injured after being struck by a 30 mm gypsum plug from a vertically fired ‘multi-shot cake’ firework.
- The resulting impact caused considerable swelling above the spectator’s eye and could have resulted in a more serious injury.
Initial testing arranged by RSHQ found that some gypsum plugs from 30 mm multi shot cakes could fall more than 100 m away. - RSHQ is engaging with industry to conduct further testing on various size hard break multi-shot cakes and will provide updated advice in the future.
How did it happen?
- The spectator was struck in the forehead by a 30 mm gypsum plug commonly used in ‘hard break’ multi-shot cakes.
- Hard break multi-shot fireworks are defined as those that project a canister containing a firework effect with clay or gypsum plugs.
- The gypsum plug was projected with enough energy to exceed both the minimum default clearance distance and the exclusion zone established by the fireworks operator in charge of the display.
- The incident occurred in an open field with minimal interference from trees and reported favourable wind conditions at ground level.
- RSHQ has undertaken testing in conjunction with the supplier of the fireworks which found gypsum plugs from 30 mm multi-shot cakes could travel more than 100 m.
- It is noted that fireworks without hard break effects – such as crossettes – do not exhibit this issue.
- A hard break is commonly found in various multi-shot cakes and is associated with a loud, sharp, and forceful effect, typically achieved using a dense charge contained within a rigid, confined inner tube.
- Most hard break multi-shot cakes are known to have a gypsum plug built into their design.
- Safety alert 113 – Fireworks injury sparks changes to exclusion zone was issued in December 2023 for similar safety concern for multi-shot cakes with clay (gypsum) plugs.
 |  |  |
| Fig 1 - Injury to forehead | Fig 2 - Injury to forehead | Fig 3 - Gypsum plug |
Recommendations
- Suppliers of fireworks must provide information to the users through technical data sheets/safety data sheets regarding the presence of a gypsum plug and the minimum required clearance distance.
- Fireworks operators must consider this advice in conjunction with the minimum default safety distances outlined in the Queensland code of practice – Control of outdoor fireworks displays (PDF, 1MB) or those supported by fireworks testing results provided by suppliers.
- Display risk assessments must take into consideration wind speed and the firework effect and debris and product safety information and their impact on exclusion zones.
- Operators must have knowledge and experience to understand the various fireworks and their effects.
- In future, RSHQ will engage with industry to conduct further tests and include the learnings in the revised fireworks code of practice for various size hard break multi-shot cakes.
- Refer to previous safety alerts about similar incidents:
References and further information
Authorised by
Hermann Fasching
-
chief-inspector-explosives
Contact:
+61 7 3199 8023
explosives@rshq.qld.gov.au
Issued by Resources Safety & Health Queensland
Safety: This information is a guide only and is issued to promote safety through experience. It is not to be taken as a statement of law and must not be construed to waive or modify any legal obligation.
Placement: Place this announcement on noticeboards and ensure all relevant people in your organisation receive a copy.
All information on this page (Fireworks debris strikes spectator - https://www.rshq.qld.gov.au/safety-and-health-alerts/explosives/fireworks-debris-strikes-spectator) is correct as of time of printing (Oct 31, 2026 8:48 pm).